High-Power Robotic Laser Cladding Workstation GR-6000LD/RW - Leading China Suppliers & Factory Solutions
Product Features
Stainless steel, nickel alloy, copper alloy, cobalt alloy, metal ceramic and other coatings can be prepared;
Various process parameters such as laser power, defocus, scanning speed, powder feeding pressure, gas flow, rotation speed, etc. can be adjusted;
The dilution rate of the cladding layer is low, which can maximize the alloy characteristics of the cladding layer;
Robot automatic cladding, high degree of automation and high efficiency;
The weld bead has high dimensional accuracy, the surface is flat and uniform, and the height difference is within 0.3mm, so the post-processing amount is small.
Product Parameters
| Main technical parameters | |
|---|---|
| Laser power | 6kw/8kw/12kw |
| Laser spot | φ3-5mm |
| Cladding efficiency | 0.25-1m2/h |
| Single coating thickness | 0.1-3mm |
| Single pass cladding width | 5mm |
| Coating surface height difference | ＜0.3mm |
| Multi-coat thickness | 5-10mm |
| Processing parts range | 0-1m |
| Length range of machined parts | 0-1t |
| Gas Type | Argon, Helium |
| Powder feeding form | Airborne powder delivery |
| Drive motor | Servo Motor |
| Controller type | Siemens PLC |
| Control screen | 10-inch color touch screen |
| Power supply | Three-phase five-wire system380V±10%，50/60Hz |
| Installation dimensions | 3-5㎡ |
| Weight | 1t |
Case Showcase
Frequently Asked Questions
The system supports a wide range of coating materials including stainless steel, nickel alloy, copper alloy, cobalt alloy, and metal ceramics.
The system configuration supports three selectable laser power options: 6kw, 8kw, and 12kw, depending on your application requirements.
The cladding efficiency ranges from 0.25 to 1 m²/h. Single coating thickness is adjustable between 0.1mm and 3mm, while multi-coat setups can reach 5mm to 10mm.
The system utilizes an advanced airborne powder delivery design, using Argon or Helium as the carrier and shielding gas.
It is equipped with a Siemens PLC controller and a user-friendly 10-inch color touch screen, driven by a high-precision servo motor.
The machine requires an installation space of 3-5㎡. It operates on a three-phase five-wire system at 380V±10%, 50/60Hz, and has a total weight of approximately 1t.