High-Power Robotic Laser Cladding Workstation GR-6000LD/RW - China Suppliers and Factory for Precision Parts
Product Features
-
Stainless steel, nickel alloy, copper alloy, cobalt alloy, metal ceramic and other coatings can be prepared;
-
Various process parameters such as laser power, defocus, scanning speed, powder feeding pressure, gas flow, rotation speed, etc. can be adjusted;
-
The dilution rate of the cladding layer is low, which can maximize the alloy characteristics of the cladding layer;
-
Robot automatic cladding, high degree of automation and high efficiency;
-
The weld bead has high dimensional accuracy, the surface is flat and uniform, and the height difference is within 0.3mm, so the post-processing amount is small.
Product Parameters
| Main technical parameters | |
|---|---|
| Laser power | 6kw/8kw/12kw |
| Laser spot | φ3-5mm |
| Cladding efficiency | 0.25-1m2/h |
| Single coating thickness | 0.1-3mm |
| Single pass cladding width | 5mm |
| Coating surface height difference | ＜0.3mm |
| Multi-coat thickness | 5-10mm |
| Processing parts range | 0-1m |
| Length range of machined parts | 0-1t |
| Gas Type | Argon, Helium |
| Powder feeding form | Airborne powder delivery |
| Drive motor | Servo Motor |
| Controller type | Siemens PLC |
| Control screen | 10-inch color touch screen |
| Power supply | Three-phase five-wire system380V±10%，50/60Hz |
| Installation dimensions | 3-5㎡ |
| Weight | 1t |
Case
Frequently Asked Questions
What types of coatings can be prepared with this equipment?
This system can prepare a wide variety of coatings, including stainless steel, nickel alloy, copper alloy, cobalt alloy, metal ceramic, and other customized alloy coatings.
What process parameters can be adjusted during operation?
Operators can adjust multiple key parameters to optimize the output, such as laser power (6kw/8kw/12kw), defocus settings, scanning speed, powder feeding pressure, gas flow, and rotation speed.
What are the power options and spot sizes available?
The system supports high-power configurations of 6kw, 8kw, and 12kw, with a laser spot diameter ranging from φ3mm to 5mm for precise cladding application.
How accurate is the cladding surface finish?
The cladding process features high dimensional accuracy. The resulting weld bead is flat and uniform, keeping the surface height difference under 0.3mm, which significantly reduces post-processing requirements.
What kind of control system and automation does the machine use?
The machine utilizes a Siemens PLC controller paired with a Servo Motor drive. It is operated via a 10-inch color touch screen and supports fully automated robot cladding for maximum efficiency.
What shielding gases and powder delivery methods are used?
The system utilizes Argon or Helium as shielding gases to prevent oxidation, and features an airborne powder delivery system to ensure consistent and uniform material flow.