High-Power Mobile Robotic Laser Cladding Equipment GR-6000LD/MB from China Suppliers and Factory
Product Features
Facilitates transportation across different areas, with a compact footprint suitable for confined workspaces and seamless switching between multiple workstations.
Highly integrated, eliminating the need for frequent disassembly and assembly, significantly reducing equipment packaging time.
Ideal for on-site repair and remanufacturing of large or immovable workpieces.
Low material consumption, with automated robotic cladding, requiring minimal manual welding expertise.
High precision in weld seam dimensions, low dilution rate of the cladding layer, minimal cladding heat, resulting in minimal workpiece deformation, a smooth and even surface, and a height difference within 0.3mm, leading to minimal post-grinding requirements.
Product Parameters
| Main Technical Parameters | |
| Laser Power | 6kw/8kw/12kw |
| Laser Spot | φ3-5mm |
| Cladding Efficiency | 0.25-1m2/h |
| Single Coating Thickness | 0.1-3mm |
| Single Track Cladding Width | 5mm |
| Single Track Cladding Thickness | 0-2.5mm (stackable) |
| Robot Reach Range | 0-3m |
| Coating Surface Height Variation | ＜0.3mm |
| Gas Types | Nitrogen, Argon, Helium |
| Pressure Range | 15-20L/min |
| Powder Feeding Method | Gas-carried powder feeding |
| Drive Motor | Servo motor |
| Controller Type | Siemens PLC |
| Control Screen | 10-inch color touch screen |
| Power Supply | Three-phase five-wire system 380V±10%，50/60Hz |
| Installation Dimensions | 15-25㎡ |
| Weight | 2000KG |
Case Studies
Frequently Asked Questions
What are the available laser power options for this equipment?
The system supports multiple laser power configurations, including 6kw, 8kw, and 12kw options depending on your processing needs.
What is the typical cladding thickness and width per track?
The single track cladding width is 5mm, with a single track cladding thickness of 0-2.5mm which is stackable. The overall single coating thickness ranges from 0.1 to 3mm.
Is the equipment suitable for on-site remanufacturing?
Yes, the highly integrated design and compact footprint make it ideal for the on-site repair and remanufacturing of large or immovable workpieces.
What type of control system does the equipment use?
It utilizes a Siemens PLC controller system integrated with a 10-inch color touch screen interface for precise operation control.
What shielding gases and pressure ranges are required?
The system is compatible with Nitrogen, Argon, and Helium gases, operating within a pressure range of 15 to 20L/min.
How does the cladding process minimize workpiece deformation?
Due to minimal cladding heat and a low dilution rate of the cladding layer, workpiece deformation is kept to a minimum. This yields a smooth, even surface with a height variation of less than 0.3mm.