High-Power 4-Axis Laser Quenching Equipment GR-6000LH/DE - China Suppliers & Factory for Mass Production
Product Features
-
Adjust various process parameters including laser power, defocusing amount, scanning speed, gas flow rate, and rotation speed.
-
4-axis linkage control with built-in laser hardening programs for user-friendly operation.
-
Features a small heat-affected zone (HAZ), uniform and controllable depth and width, no deformation, and high hardness.
-
Low consumable usage; robot-automated scanning reduces labor requirements.
-
Fast quenching speed, high efficiency, and low operating costs.
Product Parameters
| Main technical parameters | |
|---|---|
| Laser power | 6kw |
| Laser spot | 10*2mm/20*2mm/30*2mm/40*2mm |
| Quenching efficiency | 0.25-1m²/h |
| Quenching depth | 0.3-1.2mm |
| Diameter range of machined parts | 0-300mm |
| Length range of machined parts | 0-1m |
| Weight range of machined parts | 0-100kg |
| Rotation speed | 0-30r/min |
| Gas Type | Air |
| Pressure range | 15-20L/min |
| Drive motor | servo motor |
| Controller type | Siemens PLC |
| Control panel | 16-inch color touch screen |
| Power supply | Three-phase five-wire system 380V±10%, 50/60Hz |
| Installation dimensions | 3-5㎡ |
| Weight | 1000KG |
Case
Frequently Asked Questions
What process parameters can be adjusted on this laser quenching equipment?
You can easily adjust various critical parameters including the laser power, defocusing amount, scanning speed, gas flow rate, and rotation speed to suit different machining requirements.
What are the advantages of the 4-axis linkage control system?
The 4-axis linkage control features built-in laser hardening programs. This allows for automated scanning via robot control, which simplifies operations and significantly reduces labor costs.
How does the system ensure high-quality hardening results?
The system features a small heat-affected zone (HAZ), delivers uniform and controllable depth (0.3-1.2mm) and width, prevents workpiece deformation, and achieves high surface hardness.
What size and weight of parts can this machinery process?
The equipment is designed to process parts with a diameter range of 0-300mm, a length range of 0-1m, and a maximum weight of up to 100kg.
What are the power and installation requirements for the system?
It requires a three-phase five-wire system (380V±10%, 50/60Hz) power supply. The physical installation footprint required is approximately 3-5㎡, and the total weight is 1000KG.
What type of gas and pressure range does the system use?
The system utilizes Air as the gas type, operating within a pressure/flow range of 15-20L/min.